Posts Tagged ‘mining’

  • Hongxing Built Special Team

    Date: 2017.10.19 | Category: General | Response: 0

    Impact Crusher, namely impact crushing machine, is optimized after adopting advanced techniques, and the capability of impact crusher has got advanced. Impact Crusher is mainly used to crush many kinds of large, medium, small pipes. The side length of impact crusher is less than 500 mm, and the compression resistance should not be more than 350Mpa. The impact crusher is widely used in building material, hydroelectricity, artificial stone and sand, highway, etc. Impact crusher is a crushing equipment with high speed rotation and inertia. When the materials get into the area which the hammers on the effect, under the impact function rotors of the hammers at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the hammers effect for being re-crushed.

    All the materials from large to small will be crushed at the impact chamber repeatedly. The temperature of rotor-bearing should be below 60, the max temperature can not exceed 70; When the final product size is too big, we should stop to check the wear pattern of hammer and impact plate, the clearance between hammer and impact machine, sealing and dust collection in workshop should be done well. In the past, the construction waste brought a sea of troubles for the governor along with the citizens. Today, it all of a sudden turns in to the hot home for generating bricks and concrete through the construction waste disposal equipment of Shanghai Zenith Machinery Firm.Henan Hongxing Mining Machinery adopts the construction waste as aggregate, and has currently built the initial construction waste disposal gear technique in China. However, the construction waste artesian packing gives consideration to slurry concentration and mobility; so as to improve the goaf filling, hence improve the safety of urban construction. Montauk spoke with conviction. Henan Hongxing Mining Machinery has established the specialist team for construction waste disposal gear by way of adopting the advantages like management, technologies and talent etc. It helps to promote the construction waste disposal gear at home. The process won t stop till the pipes are crushed into the required size and then discharged from outlet of the China jaw crusher. When stopping machines running, impact Crusher should be according to the sequence of production flow chart, which is in contrary to the starting sequence: Feeder has to be stopped firstly, when pipes in crusher is discharged completely, then main motor and final product conveying equipment system can be stopped.

© 2012-2020 Maonan All Rights Reserved